A comprehensive photometric study of the Algol-type eclipsing binary: BG Pegasi     

E. Soydugan  F. Soydugan  T. Şenyüz  Ç. Püsküllü  O. Demircan 《New Astronomy》2011,16(2):72-78

This study presents new photometric observations of classical Algol type binary BG Peg with a δ Scuti component. The light curve modeling was provided with the physical parameters of the component stars in the BG Peg system for the first time. After modeling light curves in B and V filters, the eclipse and proximity effects were removed from the light curve to analyze intrinsic variations caused by the hotter component of the system. Frequency analysis of the residuals light represents the multi-mode pulsation of the more massive component of the BG Peg system at periods of 0.039 and 0.047 days. Two frequencies could be associated with non-radial (l = 2) modes. The total amplitude of the pulsational variability in the V light curve was found to be about 0.045 mag. The long-term orbital period variation of the system was also investigated for the first time. The O–C analysis indicates periodic variation superimposed on a downward parabola. The secular period variation means that the orbital period of the system is decreasing at a rate of ?5.5 seconds per century, probably due to the magnetic activity of the cooler component. The tilted sinusoidal O–C variation may be caused by the gravitational effect of an unseen component around the system.  相似文献   

Assessment of trace metal contents in water and bottom sediments from Eğirdir Lake,Turkey   总被引：1，自引：1，他引：0  

Şehnaz Şener  Ayşen Davraz  Remzi Karagüzel 《Environmental Earth Sciences》2014,71(6):2807-2819

The concentration of metals (Pb, As, Co, Cu, Ni, Zn, Fe and Mn) was investigated in water and sediment samples of E?irdir Lake. The Lake is the second largest fresh water lake of Turkey and it is used as drinking water in the region. The anthropogenic pollutants are primary sources of trace metals which are negatively affected lake water quality. These negative effects were observed in both lake water and bottom sediments. According to obtained data, Pb, Cu, Ni, Fe and Zn have significant enrichment in sediments samples. In addition, the hydrodynamic model of the lake was determined as effectively for Pb, Co, Cu, Ni, Zn, Fe and Mn accumulations. Also, the effect of anthropogenic pollutants was found to be more dominant than geogenic effect in metal accumulation of the lake bottom sediments. Therefore, anthropogenic pollutants within the lake basin should be consistently controlled for the sustainable usage of the lake.  相似文献   

Dimensionless straight line fitting method for hydrogeological parameter determination     

Zekai Şen 《Arabian Journal of Geosciences》2014,7(2):819-825

Aquifers may have alluvium deposits, weathered layers, fractured zones, and karstic formations separately or in mixture forms. Such geological configurations do not allow classical aquifer test applicability, due to a set of underlying assumptions that are not usually valid in nature. In practice, the Jacob straight line method is the most commonly used approach for aquifer parameter determinations. Constant transmissivity and storativity estimations depend on large time-drawdown plots on semilogarithmic paper as a straight line. A common mistake is that the appearance of a general trend as a straight line on semilogarithmic paper is taken as guaranteed for the application of Jacob method. Since Jacob straight line is the large time extension of Theis type curve, there is only one straight line on the semilogarithmic paper that can represent Jacob method, which is based on the assumption that the aquifer is porous and homogeneous. In such a case, the Jacob method slope should equal to 2.3, which shows its validity. Otherwise, a modification of Jacob method is suggested in this paper. The basis of the methodology is a dimensionless type straight line approach for the aquifer parameter assessment. Its application is presented for aquifer test data from Oude Korendjik porous medium aquifer data. The application results indicate that the classical Jacob straight line method might not be valid without a preliminary check. The dimensionless reevaluation of existing data helps to check the validity. The necessary formulations for the modification of the classical straight line method are derived, which reduce to classical Jacob method for a specific set of parameters.  相似文献   

Rock quality designation-fracture intensity index method for geomechanical classification     

Zekai Şen 《Arabian Journal of Geosciences》2014,7(7):2915-2922

Rock quality designation (RQD) is a simple and effective way of rock mass classification from surface scanlines or preferably borehole measurements. A major drawback in its classical use is that only one representative RQD value is obtained from the field measurements per core run. However, it is shown in this paper that the field measurements along a scanline provide detailed information about the rock quality and the fracture intensity (FI) for a given number of joints. In order to be able to extract the complete information concealed within the field data, the RQD-fracture index diagram concept is proposed and applied to actual field scanline measurements from England. The basis of the suggested procedure is to obtain a series of all possible RQD and FI values from given intact length measurements. This procedure provides additional information as to the local zones of heterogeneities within the rock mass and a new way of rock classification on the basis of the combined effects of RQD and FI. It is also possible to calculate percentages of different rock qualities within the same rock mass.  相似文献   

A climatological study of the relations among solar activity,galactic cosmic ray and precipitation on various regions over the globe     

Sourabh Bal  M. Bose 《Journal of Earth System Science》2010,119(2):201-209

We apply Fourier and wavelet analyses to the precipitation and sunspot numbers in the time series (1901–2000) over Australia (27°S, 133°E), Canada (60°N, 95°W), Ethiopia (8°N, 38°E), Greenland (72°N, 40°W), United Kingdom (54°N, 2°W), India (20°N, 77°E), Iceland (65°N, 18°W), Japan (36°N, 138°E), United States (38°N, 97°W), South Africa (29°S, 24°E) and Russia (60°N, 100°E). Correlation analyses were also performed to find any relation among precipitation, sunspot numbers, temperature, and cloud-cover at the same spatial and temporal scale. Further correlations were also performed between precipitation with electron and proton fluence at the time interval, 1987–2006. All these parameters were considered in annual and seasonal scales. Though correlation study between precipitation and other parameters do not hint any linear relation, still the Fourier and wavelet analyses give an idea of common periodicities. The 9–11 year periodicity of sunspot numbers calculated by Fourier transform is also confirmed by wavelet transform in annual scale. Similarly, wavelet analysis for precipitation also supports the short periods at 2–5 years which is verified by Fourier transform in discontinuous time over different geographic regions.  相似文献   

Trace and rare-earth element behaviors during alteration and mineralization in the Attepe iron deposits (Feke-Adana,southern Turkey)     

Şuayip Küpeli 《Journal of Geochemical Exploration》2010

Hydrothermal-metasomatic iron ores consisting mainly of siderite, ankerite and hematite are located in the Lower–Middle Cambrian limestone marbles of the Eastern Taurus Belt. The siderite, ankerite, hematite and host rock samples from the deposits have been investigated for major, trace, and rare-earth elements (REE) to evaluate the element mobility and mass transfer during fluid–rock interactions.  相似文献   

Periodic motions around pulsating stars     

Dan Şelaru  Cātālin Cucu-Dumitrescu  Vasile Mioc 《Astrophysics and Space Science》1993,202(1):11-19

The periodic motion of a test particle (dust, grain, or a larger body) around a pulsating star with a luminosity oscillation of small amplitude (featured by a small parameterB) is being studied. The perturbations of all orbital elements are determined to first order inB, by using Delaunay-type canonical variables and a method whose bases were put forth by von Zeipel. According to the value of the ratio oscillation frequency/dynamic frequency, three possible situations are pointed out: nonresonant (NR), quasi-resonant (QR), and resonant (R). The solution of motion equations shows that only in the (QR) and (R) cases there are orbital parameters (argument of periastron and mean anomaly) affected by secular perturbations. These solutions (which indicate a secularly stable motion in a first approximation) are valid over prediction times of orderB ^–1 in the (NR) case andB ^–1/2 in the (QR) and (R) cases. The theory may be applied to various astronomical situations.  相似文献   

Coprecipitation with Cu(II)‐4‐(2‐Pyridylazo)‐resorcinol for Separation and Preconcentration of Fe(III) and Ni(II) in Water and Food Samples     

Şerife Tokalıoğlu  Osman Daşdelen 《洁净——土壤、空气、水》2011,39(3):296-300

The coprecipitation method is widely used for the preconcentration of trace metal ions prior to their determination by flame atomic absorption spectrometry (FAAS). A simple and sensitive method based on coprecipitation of Fe(III) and Ni(II) ions with Cu(II)‐4‐(2‐pyridylazo)‐resorcinol was developed. The analytical parameters including pH, amount of copper (II), amount of reagent, sample volume, etc., were examined. It was found that the metal ions studied were quantitatively coprecipitated in the pH range of 5.0–6.5. The detection limits (DL) (n = 10, 3s/b) were found to be 0.68 µg L^?1 for Fe(III) and 0.43 µg L^?1 for Ni(II) and the relative standard deviations (RSD) were ≤4.0%. The proposed method was validated by the analysis of three certified reference materials (TMDA 54.4 fortified lake water, SRM 1568a rice flour, and GBW07605 tea) and recovery tests. The method was successfully applied to sea water, lake water, and various food samples.  相似文献   

Color Removal from Synthetic Textile Wastewater by Sono‐Fenton Process     

Celalettin Özdemir  Muhammed Kamil Öden  Serkan Şahinkaya  Erkan Kalipçi 《洁净——土壤、空气、水》2011,39(1):60-67

In this study, the oxidative decolorization of C.I. reactive yellow 145 (RY 145) from synthetic textile wastewater including RY 145 and polyvinyl alcohol by Fenton and sono‐Fenton processes which are the combination of Fenton process with ultrasound has been carried out. The effects of some operating parameters which are the initial pH of the solution, the initial concentration of Fe²⁺, H₂O₂, and the dye, temperature, and agitation speed on the color and chemical oxygen demand (COD) removals have been investigated. The optimum conditions have been found as [Fe²⁺] = 20 mg/L, [H₂O₂] = 20 mg/L, pH 3 for Fenton process and [Fe²⁺] = 20 mg/L, [H₂O₂] = 15 mg/L, pH 3 for sono‐Fenton process by indirectly sonication at 35 kHz ultrasonic frequency and 80 W ultrasonic power. The color and COD removal efficiencies have been obtained as 91 and 47% by Fenton process, and 95 and 51% by sono‐Fenton processes, respectively. Kinetic studies have been performed for the decolorization of RY 145 under optimum conditions at room temperature. It has been determined that the decolorization has occurred rapidly by sono‐Fenton process, compared to Fenton process.  相似文献   

Flash flood inundation map preparation for wadis in arid regions     

Zekai Şen  Hussam A. Khiyami  Saad G. Al-Harthy  Faisal A. Al-Ammawi  Ali B. Al-Balkhi  Mohammed I. Al-Zahrani  Hashim M. Al-Hawsawy 《Arabian Journal of Geosciences》2013,6(9):3563-3572

Flood inundation maps are dependent on the topographic and geomorphologic features of a wadi (drainage basin) in arid regions, which are most susceptible for potential flash flood occurrences, such as in the southwestern part of the Kingdom of Saudi Arabia. It is not possible to control the potential flood hazards by using only technological instruments that forewarn the occurrences or imminence. Additionally, it would be better to prepare flood risk maps so as to delineate the risky areas to educate the administrators and local settlers. The availability of these maps is the key requirement for any urban development that entails land use allocation, identification of dam, tunnel, highway, bridge sites, and infrastructure locations for sustainable future. This paper suggests the necessary steps in flood inundation map preparation after determining the possible flood discharge. For this purpose, a set of critical cross-sections along the possible flood plain are taken in the field with surveying methods and measurements. The calculation of the average flow velocity in each section is calculated according to the cross-section geometric, hydraulic, and material properties. Synthetic rating curves (SRC) are prepared for each cross section, which are very useful especially in arid and semi-arid regions where there are no perennial surface water flows for natural rating curve measurements. All the SRCs appear in the form of power function which relates the flow depth to discharge in a given cross section. It is then possible to calculate the flood depth in the cross section through its SRC. Depending on the cross-section shape, the flood width can be calculated. The connection of a series of widths on a scaled topographic map delineates the flood inundation area. If digital elevation map (DEM) is available, then the SRCs can be integrated with these maps and the flood inundation delineation can be achieved automatically. Since DEMs are not available, the topographic maps are used for this purpose in order to delineate flood inundation areas within wadis Hali and Yiba from the southwestern Kingdom of Saudi Arabia.  相似文献